RE_Error//!< A communication error happened (such as a timeout) ; the library will stop all 1-wire activities until the next reset
RE_Error//!< A communication error happened (such as a timeout) ; the library will stop all 1-wire activities until the next reset
};
};
//! Starts listening for the 1-wire master, on the specified pin, as a virtual slave device identified by the specified ROM (7 bytes, starting from the family code, CRC will be computed internally). Reset, Presence, SearchRom and MatchRom are handled automatically. The library will use the external interrupt on the specified pin (note that this is usually not possible with all pins, depending on the board), as well as one hardware timer. Blocking interrupts (either by disabling them explicitely with sei/cli, or by spending time in another interrupt) can lead to malfunction of the library, due to tight timing for some 1-wire operations.
//! Starts listening for the 1-wire master, on the specified pin, as a virtual slave device identified by the specified ROM (7 bytes, starting from the family code, CRC will be computed internally). Reset, Presence, SearchRom and MatchRom are handled automatically. The library will use the external interrupt on the specified pin (note that this is usually not possible with all pins, depending on the board), as well as one hardware timer. Blocking interrupts (either by disabling them explicitely with sei/cli, or by spending time in another interrupt) can lead to malfunction of the library, due to tight timing for some 1-wire operations.
voidbegin(constbyte*rom,bytepinNumber);
voidbegin(constbyte*rom,bytepinNumber);
//! Stops all 1-wire activities, which frees hardware resources for other purposes.
//! Stops all 1-wire activities, which frees hardware resources for other purposes.
voidend();
voidend();
//! Sets (or replaces) a function to be called when something is received. The callback is executed from interrupts and should be as short as possible. Failure to return quickly can prevent the library from correctly reading the next byte.
//! Sets (or replaces) a function to be called when something is received. The callback is executed from interrupts and should be as short as possible. Failure to return quickly can prevent the library from correctly reading the next byte.
//! Sets (or replaces) a function to be called when a bit is received. The byte reception callback is called after that if the received bit was the last of a byte. The callback is executed from interrupts and should be as short as possible. Failure to return quickly can prevent the library from correctly reading the next bit.
//! Sets (or replaces) a function to be called when a bit is received. The byte reception callback is called after that if the received bit was the last of a byte. The callback is executed from interrupts and should be as short as possible. Failure to return quickly can prevent the library from correctly reading the next bit.
//! Sets (or replaces) a function to be called when the library has a message to log, if the functionality is enabled in OneWireSlave.cpp. This is for debugging purposes.
//! Writes the specified bytes synchronously. This function blocks until the write operation has finished. Do not call from an interrupt handler! Returns true in case of success, false if an error occurs.
boolwrite(constbyte*bytes,shortnumBytes);
//! Sets (or replaces) a function to be called when the library has a message to log, if the functionality is enabled in OneWireSlave.cpp. This is for debugging purposes.
//! Starts sending the specified bytes. They will be sent in the background, and the buffer must remain valid and unchanged until the write operation has finished or is cancelled. The optional callback is used to notify when the bytes are sent, or if an error occured. Callbacks are executed from interrupts and should be as short as possible. If bytes is null or numBytes is 0, nothing is sent, which is equivalent to calling stopWrite. In any case, calling the write function will cancel the previous write operation if it didn't complete yet.
//! Writes the specified bytes synchronously. This function blocks until the write operation has finished. Do not call from an interrupt handler! Returns true in case of success, false if an error occurs.
//! Writes a single bit synchronously. This function blocks until the bit is sent. Do not call from an interrupt handler! Returns true in case of success, false if an error occurs.
boolwrite(constbyte*bytes,shortnumBytes);
boolwriteBit(boolvalue);
//! Starts sending the specified bytes. They will be sent in the background, and the buffer must remain valid and unchanged until the write operation has finished or is cancelled. The optional callback is used to notify when the bytes are sent, or if an error occured. Callbacks are executed from interrupts and should be as short as possible. If bytes is null or numBytes is 0, nothing is sent, which is equivalent to calling stopWrite. In any case, calling the write function will cancel the previous write operation if it didn't complete yet.
//! Sets a bit that will be sent next time the master asks for one. Optionnaly, the repeat parameter can be set to true to continue sending the same bit each time. In both cases, the send operation can be canceled by calling stopWrite.
//! Writes a single bit synchronously. This function blocks until the bit is sent. Do not call from an interrupt handler! Returns true in case of success, false if an error occurs.
//! Cancels any pending write operation, started by writeBit or write. If this function is called before the master asked for a bit, then nothing is sent to the master.
boolwriteBit(boolvalue);
voidstopWrite();
//! Sets a bit that will be sent next time the master asks for one. Optionnaly, the repeat parameter can be set to true to continue sending the same bit each time. In both cases, the send operation can be canceled by calling stopWrite.
//! Sets the alarmed state, that is used when the master makes a conditional search of alarmed devices.
//! Cancels any pending write operation, started by writeBit or write. If this function is called before the master asked for a bit, then nothing is sent to the master.
staticbytecrc8(constbyte*data,shortnumBytes);
voidstopWrite();
//! Sets the alarmed state, that is used when the master makes a conditional search of alarmed devices.
IanF
5 years ago