symlink hacks to make Arduino IDE use local libraries

ESP32/.cproject

@@ -11,9 +11,15 @@
 	</storageModule>
 	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
 	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
 	<storageModule moduleId="org.eclipse.cdt.core.pathentry">
-		<pathentry include="~/.arduino15/packages/esp32/hardware/esp32/1.0.6/cores/esp32" kind="inc" path="" system="true"/>
-		<pathentry include="~/.arduino15/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/.arduino15/packages/esp32/hardware/esp32/1.0.6/cores/esp32" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/.arduino15/packages/esp32/hardware/esp32/1.0.6/tools/sdk/include/newlib" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/.arduino15/packages/esp32/hardware/esp32/1.0.6/libraries/WiFi/src" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/Arduino/libraries/AsyncTCP/src" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/Arduino/libraries/ESPAsyncWebServer/src" kind="inc" path="" system="true"/>
+		<pathentry include="/home/youen/.arduino15/packages/esp32/hardware/esp32/1.0.6/libraries/FS/src" kind="inc" path="" system="true"/>
+		<pathentry kind="mac" name="ESP32" path="" value=""/>
 		<pathentry kind="out" path="build"/>
 		<pathentry kind="src" path=""/>
 	</storageModule>

ESP32/register-libraries.sh

@@ -0,0 +1,9 @@
+#!/bin/sh
+DIR="$( cd "$( dirname "$0" )" && pwd )"
+
+rm -f -- ~/Arduino/libraries/AsyncTCP
+ln -s $DIR/3rdparty/AsyncTCP ~/Arduino/libraries/AsyncTCP
+
+rm -f -- ~/Arduino/libraries/ESPAsyncWebServer
+ln -s $DIR/3rdparty/ESPAsyncWebServer ~/Arduino/libraries/ESPAsyncWebServer
+

ESP32/vehicle-monitor.cpp

@@ -1,31 +1,17 @@
-/* The true ESP32 chip ID is essentially its MAC address.
-This sketch provides an alternate chip ID that matches 
-the output of the ESP.getChipId() function on ESP8266 
-(i.e. a 32-bit integer matching the last 3 bytes of 
-the MAC address. This is less unique than the 
-MAC address chip ID, but is helpful when you need 
-an identifier that can be no more than a 32-bit integer 
-(like for switch...case).
-
-created 2020-06-07 by cweinhofer
-with help from Cicicok */
-
 #include <Arduino.h>
 
-uint32_t chipId = 0;
+#include <WiFi.h>
+#include <ESPAsyncWebServer.h>
 
-void setup() {
+void setup()
+{
 	Serial.begin(115200);
 }
 
-void loop() {
-	for(int i=0; i<17; i=i+8) {
-	  chipId |= ((ESP.getEfuseMac() >> (40 - i)) & 0xff) << i;
-	}
-
+void loop()
+{
 	Serial.printf("ESP32 Chip model = %s Rev %d\n", ESP.getChipModel(), ESP.getChipRevision());
 	Serial.printf("This chip has %d cores\n", ESP.getChipCores());
-  Serial.print("Chip ID: "); Serial.println(chipId);
 
 	delay(3000);
 }