Browse Source

Device identification and simple command listening (not tested yet)

pull/5/head
Youen Toupin 10 years ago
parent
commit
16dbbc37e4
  1. 59
      OneWireIO.ino

59
OneWireIO.ino

@ -1,7 +1,62 @@
void setup() {
#include "OWSlave.h"
#define LEDPin 13
#define OWPin 2
#define InterruptNumber 0 // Must correspond to the OWPin to correctly detect state changes. On Arduino Uno, interrupt 0 is for digital pin 2
unsigned char rom[8] = {0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
volatile long prevInt = 0; // Previous Interrupt micros
volatile boolean owReset = false;
OWSlave oneWire(OWPin);
void setup()
{
pinMode(LEDPin, OUTPUT);
pinMode(OWPin, INPUT);
digitalWrite(LEDPin, LOW);
attachInterrupt(InterruptNumber,onewireInterrupt,CHANGE);
oneWire.setRom(rom);
}
void loop()
{
if (owReset) owHandler();
}
void loop() {
void owHandler(void)
{
detachInterrupt(InterruptNumber);
owReset=false;
if (oneWire.presence()) {
if (oneWire.recvAndProcessCmd()) {
uint8_t cmd = oneWire.recv();
if (cmd == 0x44) {
digitalWrite(LEDPin, HIGH);
}
if (cmd == 0xBE) {
for( int i = 0; i < 9; i++) {
oneWire.send((byte)0);
}
}
}
}
attachInterrupt(InterruptNumber,onewireInterrupt,CHANGE);
}
void onewireInterrupt(void)
{
volatile long lastMicros = micros() - prevInt;
prevInt = micros();
if (lastMicros >= 410 && lastMicros <= 550)
{
// OneWire Reset Detected
owReset=true;
}
}

Loading…
Cancel
Save