diff --git a/OneWireIO.ino b/OneWireIO.ino index 400880b..904de41 100644 --- a/OneWireIO.ino +++ b/OneWireIO.ino @@ -34,7 +34,7 @@ enum OwStatus }; OwStatus status; -byte owROM[8] = { 0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00 }; +byte owROM[8] = { 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00 }; byte searchROMCurrentByte = 0; byte searchROMCurrentBit = 0; bool searchROMSendingInverse = false; @@ -44,23 +44,23 @@ void owPullLow() { owPin.outputMode(); owPin.writeLow(); - //owOutTestPin.writeLow(); + owOutTestPin.writeLow(); } void owRelease() { owPin.inputMode(); - //owOutTestPin.writeHigh(); + owOutTestPin.writeHigh(); } void onEnterInterrupt() { - owOutTestPin.writeLow(); + //owOutTestPin.writeLow(); } void onLeaveInterrupt() { - owOutTestPin.writeHigh(); + //owOutTestPin.writeHigh(); } volatile unsigned long resetStart = (unsigned long)-1; @@ -83,7 +83,7 @@ void setup() led.writeLow(); cli(); // disable interrupts - attachInterrupt(InterruptNumber,onewireInterrupt,FALLING); + attachInterrupt(InterruptNumber, owWaitResetInterrupt, CHANGE); // set timer0 interrupt at 250KHz (actually depends on compare match register OCR0A) // 4us between each tick @@ -98,18 +98,16 @@ void setup() Serial.begin(9600); } -//int count = 0; +int count = 0; void loop() { - //if ((count++) % 1000 == 0) - // led.write(!led.read()); + if ((count++) % 1000 == 0) + led.write(!led.read()); cli();//disable interrupts SerialChannel::swap(); sei();//enable interrupts SerialChannel::flush(); - - owHandleReset(); } void(*timerEvent)() = 0; @@ -138,56 +136,54 @@ void owClearError() led.writeLow(); } -void owHandleReset() +void owWaitResetInterrupt() { - unsigned long localResetStart = resetStart; - if (owPin.read()) - { - resetStart = (unsigned long)-1; - } - else if (localResetStart != (unsigned long)-1) + onEnterInterrupt(); + bool state = owPin.read(); + unsigned long now = micros(); + if (state) { - unsigned long resetDuration = micros() - localResetStart; + if (resetStart == (unsigned int)-1) + { + onLeaveInterrupt(); + return; + } + + unsigned long resetDuration = now - resetStart; + resetStart = (unsigned int)-1; if (resetDuration >= ResetMinDuration) { - // wait for master to release the pin (or timeout if the pin is pulled low for too long) - unsigned long now = micros(); - while (!owPin.read()) + if (resetDuration > ResetMaxDuration) { - if (resetStart != localResetStart) - return; - now = micros(); - if (now - localResetStart > ResetMaxDuration) - { - owError("Reset too long"); - return; - } + owError("Reset too long"); + onLeaveInterrupt(); + return; } - cli(); owClearError(); lastReset = now; status = OS_Presence; setTimerEvent(PresenceWaitDuration - (micros() - now), &beginPresence); - sei(); } } -} - -void onewireInterrupt() -{ - onEnterInterrupt(); - onewireInterruptImpl(); + else + { + resetStart = now; + } onLeaveInterrupt(); } //bool debugState = false; volatile unsigned long lastInterrupt = 0; -void onewireInterruptImpl(void) +void owReceiveCommandInterrupt(void) { + onEnterInterrupt(); unsigned long now = micros(); if (now < lastInterrupt + 20) + { + onLeaveInterrupt(); return; // don't react to our own actions + } lastInterrupt = now; //debugState = !debugState; @@ -195,45 +191,41 @@ void onewireInterruptImpl(void) //led.write(state); - resetStart = now; + bool bit = readBit(); + /*if (bit) + debug.SC_APPEND_STR("received bit 1"); + else + debug.SC_APPEND_STR("received bit 0");*/ - switch (status) { - case OS_WaitCommand: - { - bool bit = readBit(); - /*if (bit) - debug.SC_APPEND_STR("received bit 1"); - else - debug.SC_APPEND_STR("received bit 0");*/ + receivingByte |= ((bit ? 1 : 0) << receivingBitPos); + ++receivingBitPos; - receivingByte |= ((bit ? 1 : 0) << receivingBitPos); - ++receivingBitPos; + if (receivingBitPos == 8) + { + byte receivedByte = receivingByte; + receivingBitPos = 0; + receivingByte = 0; + //debug.SC_APPEND_STR_INT("received byte", (long)receivedByte); - if (receivingBitPos == 8) + if (status == OS_WaitCommand && receivedByte == 0xF0) { - byte receivedByte = receivingByte; - receivingBitPos = 0; - receivingByte = 0; - //debug.SC_APPEND_STR_INT("received byte", (long)receivedByte); - - if (status == OS_WaitCommand && receivedByte == 0xF0) - { - status = OS_SearchRom; - searchROMReadingMasterResponseBit = false; - searchROMSendingInverse = false; - searchROMCurrentByte = 0; - searchROMCurrentBit = 0; - byte currentByte = owROM[searchROMCurrentByte]; - searchRomNextBit = bitRead(currentByte, searchROMCurrentBit); - searchRomNextBitToSend = searchROMSendingInverse ? !searchRomNextBit : searchRomNextBit; - //attachInterrupt(InterruptNumber, onewireInterruptSearchROM, FALLING); - setTimerEvent(10, owSearchSendBit); - detachInterrupt(InterruptNumber); - return; - } + status = OS_SearchRom; + searchROMReadingMasterResponseBit = false; + searchROMSendingInverse = false; + searchROMCurrentByte = 0; + searchROMCurrentBit = 0; + byte currentByte = owROM[searchROMCurrentByte]; + searchRomNextBit = bitRead(currentByte, searchROMCurrentBit); + searchRomNextBitToSend = searchROMSendingInverse ? !searchRomNextBit : searchRomNextBit; + //attachInterrupt(InterruptNumber, onewireInterruptSearchROM, FALLING); + setTimerEvent(10, owSearchSendBit); + detachInterrupt(InterruptNumber); + onLeaveInterrupt(); + return; } - } break; } + + onLeaveInterrupt(); } bool ignoreNextFallingEdge = false; @@ -311,7 +303,7 @@ void onewireInterruptSearchROM() { debug.SC_APPEND_STR("Master didn't send our bit, leaving ROM search"); status = OS_WaitReset; - attachInterrupt(InterruptNumber, onewireInterrupt, FALLING); + attachInterrupt(InterruptNumber, owWaitResetInterrupt, CHANGE); onLeaveInterrupt(); return; } @@ -330,7 +322,7 @@ void onewireInterruptSearchROM() searchROMCurrentByte = 0; status = OS_WaitReset; debug.SC_APPEND_STR("ROM sent entirely"); - attachInterrupt(InterruptNumber, onewireInterrupt, FALLING); + attachInterrupt(InterruptNumber, owWaitResetInterrupt, CHANGE); onLeaveInterrupt(); return; } @@ -411,6 +403,7 @@ void endPresence() debug.SC_APPEND_STR_TIME("endPresence", now); status = OS_WaitCommand; + attachInterrupt(InterruptNumber, owReceiveCommandInterrupt, FALLING); receivingByte = 0; receivingBitPos = 0; bitStart = (unsigned long)-1;