OneWireArduinoSlave/OneWireIO.ino

#include "Arduino.h"
#include "LowLevel.h"
#include "SerialChannel.h"

#define LEDPin    13
#define OWPin 2
#define InterruptNumber 0 // Must correspond to the OWPin to correctly detect state changes. On Arduino Uno, interrupt 0 is for digital pin 2

#define ResetMinDuration 480
#define ResetMaxDuration 900

#define PresenceWaitDuration 30
#define PresenceDuration 300

#define ReadBitSamplingTime 13 // the theorical time is about 30us, but given various overhead, this is the empirical delay I've found works best (on Arduino Uno)

#define SendBitDuration 35

const byte InvalidBit = (byte)-1;
const byte IncompleteBit = (byte)-2;

SerialChannel debug("debug");

Pin owPin(OWPin);
Pin owOutTestPin(3);
Pin led(LEDPin);

enum OwStatus
{
	OS_WaitReset,
	OS_Presence,
	OS_WaitCommand,
	OS_SearchRom,
};
OwStatus status;

byte owROM[8] = { 0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00 };
byte searchROMCurrentByte = 0;
byte searchROMCurrentBit = 0;
bool searchROMSendingInverse = false;
bool searchROMReadingMasterResponseBit = false;

void owPullLow()
{
	owPin.outputMode();
	owPin.writeLow();
	owOutTestPin.writeLow();
}

void owRelease()
{
	owPin.inputMode();
	owOutTestPin.writeHigh();
}

volatile unsigned long resetStart = (unsigned long)-1;
unsigned long lastReset = (unsigned long)-1;
unsigned long bitStart = (unsigned long)-1;
byte receivingByte = 0;
byte receivingBitPos = 0;

void setup()
{
	led.outputMode();
	owPin.inputMode();
	owOutTestPin.outputMode();
	owOutTestPin.writeHigh();

	led.writeLow();

	cli(); // disable interrupts
    attachInterrupt(InterruptNumber,onewireInterrupt,FALLING);

	// set timer0 interrupt at 250KHz (actually depends on compare match register OCR0A)
	// 4us between each tick
	TCCR1A = 0;
	TCCR1B = 0;
	TCNT1 = 0; // initialize counter value to 0
	//TCCR1B |= (1 << WGM12); // turn on CTC mode
	//TCCR1B |= (1 << CS11) | (1 << CS10); // Set 64 prescaler
	TIMSK1 |= (1 << OCIE1A); // enable timer compare interrupt
	sei(); // enable interrupts
    
    Serial.begin(9600);
}

//int count = 0;
void loop()
{
	//if ((count++) % 1000 == 0)
	//	led.write(!led.read());
	cli();//disable interrupts
	SerialChannel::swap();
	sei();//enable interrupts

	SerialChannel::flush();

	owHandleReset();
}

void(*timerEvent)() = 0;
void setTimerEvent(short microSecondsDelay, void(*event)())
{
	microSecondsDelay -= 10; // this seems to be the typical time taken to initialize the timer on Arduino Uno

	short skipTicks = (microSecondsDelay - 3) / 4; // round the micro seconds delay to a number of ticks to skip (4us per tick, so 4us must skip 0 tick, 8us must skip 1 tick, etc.)
	if (skipTicks < 1) skipTicks = 1;
	//debug.SC_APPEND_STR_INT("setTimerEvent", (long)skipTicks);
	TCNT1 = 0;
	OCR1A = skipTicks;
	timerEvent = event;
	TCCR1B = (1 << WGM12) | (1 << CS11) | (1 << CS10); // turn on CTC mode with 64 prescaler
}

void owError(const char* message)
{
	debug.append(message);
	led.writeHigh();
	status = OS_WaitReset;
}

void owClearError()
{
	led.writeLow();
}

void owHandleReset()
{
	unsigned long localResetStart = resetStart;
	if (owPin.read())
	{
		resetStart = (unsigned long)-1;
	}
	else if (localResetStart != (unsigned long)-1)
	{
		unsigned long resetDuration = micros() - localResetStart;
		if (resetDuration >= ResetMinDuration)
		{
			// wait for master to release the pin (or timeout if the pin is pulled low for too long)
			unsigned long now = micros();
			while (!owPin.read())
			{
				if (resetStart != localResetStart)
					return;
				now = micros();
				if (now - localResetStart > ResetMaxDuration)
				{
					owError("Reset too long");
					return;
				}
			}

			cli();
			owClearError();
			lastReset = now;
			status = OS_Presence;
			setTimerEvent(PresenceWaitDuration - (micros() - now), &beginPresence);
			sei();
		}
	}
}

void onewireInterrupt()
{
	//owOutTestPin.writeLow();
	onewireInterruptImpl();
	//owOutTestPin.writeHigh();
}

//bool debugState = false;
volatile unsigned long lastInterrupt = 0;
void onewireInterruptImpl(void)
{
	unsigned long now = micros();
	if (now < lastInterrupt + 20)
		return; // don't react to our own actions
	lastInterrupt = now;
	
	//debugState = !debugState;
	//owOutTestPin.write(debugState);

	//led.write(state);

	resetStart = now;

	// read bytes
	switch (status) {
	case OS_WaitCommand:
	{
		bool bit = readBit();

		receivingByte |= ((bit ? 1 : 0) << receivingBitPos);
		++receivingBitPos;

		if (receivingBitPos == 8)
		{
			byte receivedByte = receivingByte;
			receivingBitPos = 0;
			receivingByte = 0;
			//debug.SC_APPEND_STR_INT("received byte", (long)receivedByte);

			if (status == OS_WaitCommand && receivedByte == 0xF0)
			{
				status = OS_SearchRom;
				searchROMReadingMasterResponseBit = false;
				searchROMSendingInverse = false;
				searchROMCurrentByte = 0;
				searchROMCurrentBit = 0;
				attachInterrupt(InterruptNumber, onewireInterruptSearchROM, FALLING);
				return;
			}
		}
	} break;

	case OS_SearchRom:
	{
		
	} break;
	}
}

bool ignoreNextFallingEdge = false;
void onewireInterruptSearchROM()
{
	/*unsigned long now = micros();
	if (now < lastInterrupt + 20)
		return; // don't react to our own actions
	lastInterrupt = now;*/
	if (ignoreNextFallingEdge)
	{
		ignoreNextFallingEdge = false;
		return;
	}

	if (searchROMReadingMasterResponseBit)
	{
		bool bit = readBit();

		byte currentByte = owROM[searchROMCurrentByte];
		bool currentBit = bitRead(currentByte, searchROMCurrentBit);

		if (bit != currentBit)
		{
			debug.SC_APPEND_STR("Master didn't send our bit, leaving ROM search");
			status = OS_WaitReset;
			attachInterrupt(InterruptNumber, onewireInterrupt, FALLING);
			return;
		}

		searchROMReadingMasterResponseBit = false;
		++searchROMCurrentBit;
		if (searchROMCurrentBit == 8)
		{
			++searchROMCurrentByte;
			searchROMCurrentBit = 0;
			debug.SC_APPEND_STR("sent another ROM byte");
		}

		if (searchROMCurrentByte == 8)
		{
			searchROMCurrentByte = 0;
			status = OS_WaitReset;
			debug.SC_APPEND_STR("ROM sent entirely");
			attachInterrupt(InterruptNumber, onewireInterrupt, FALLING);
			return;
		}
	}
	else
	{
		byte currentByte = owROM[searchROMCurrentByte];
		bool currentBit = bitRead(currentByte, searchROMCurrentBit);
		//bool currentBit = 0;

		bool bitToSend = searchROMSendingInverse ? !currentBit : currentBit;
		sendBit(bitToSend);
		/*if (bitToSend)
			debug.SC_APPEND_STR("sent ROM search bit : 1");
		else
			debug.SC_APPEND_STR("sent ROM search bit : 0");*/

		if (searchROMSendingInverse)
		{
			searchROMSendingInverse = false;
			searchROMReadingMasterResponseBit = true;
		}
		else
		{
			searchROMSendingInverse = true;
		}
	}
}

bool readBit()
{
	delayMicroseconds(ReadBitSamplingTime);
	return owPin.read();
}

void sendBit(bool bit)
{
	if (bit)
	{
		delayMicroseconds(SendBitDuration);
	}
	else
	{
		owPullLow();
		delayMicroseconds(SendBitDuration);
		owRelease();
		ignoreNextFallingEdge = true;
	}
}

void beginPresence()
{
	unsigned long now = micros();
	owPullLow();
	setTimerEvent(PresenceDuration, &endPresence);
	debug.SC_APPEND_STR_TIME("reset", lastReset);
	debug.SC_APPEND_STR_TIME("beginPresence", now);
}

void endPresence()
{
	unsigned long now = micros();
	owRelease();
	debug.SC_APPEND_STR_TIME("endPresence", now);

	status = OS_WaitCommand;
	receivingByte = 0;
	receivingBitPos = 0;
	bitStart = (unsigned long)-1;
}

ISR(TIMER1_COMPA_vect) // timer1 interrupt
{
	TCCR1B = 0; // disable clock
	void(*event)() = timerEvent;
	timerEvent = 0;
	if (event != 0)
		event();
}