diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..1ff0c42
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..7964536
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,189 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
+*.suo
+*.user
+*.sln.docstates
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+x64/
+build/
+bld/
+[Bb]in/
+[Oo]bj/
+
+# Roslyn cache directories
+*.ide/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+#NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+*_i.c
+*_p.c
+*_i.h
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opensdf
+*.sdf
+*.cachefile
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding addin-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+## TODO: Comment the next line if you want to checkin your
+## web deploy settings but do note that will include unencrypted
+## passwords
+#*.pubxml
+
+# NuGet Packages Directory
+packages/*
+## TODO: If the tool you use requires repositories.config
+## uncomment the next line
+#!packages/repositories.config
+
+# Enable "build/" folder in the NuGet Packages folder since
+# NuGet packages use it for MSBuild targets.
+# This line needs to be after the ignore of the build folder
+# (and the packages folder if the line above has been uncommented)
+!packages/build/
+
+# Windows Azure Build Output
+csx/
+*.build.csdef
+
+# Windows Store app package directory
+AppPackages/
+
+# Others
+sql/
+*.Cache
+ClientBin/
+[Ss]tyle[Cc]op.*
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.pfx
+*.publishsettings
+node_modules/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+*.mdf
+*.ldf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# LightSwitch generated files
+GeneratedArtifacts/
+_Pvt_Extensions/
+ModelManifest.xml
\ No newline at end of file
diff --git a/OWSlave.cpp b/OWSlave.cpp
deleted file mode 100644
index c498aa5..0000000
--- a/OWSlave.cpp
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
-OWSlave v1.0 by Alexander Gordeyev
-
-It is based on Jim's Studt OneWire library v2.0
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Much of the code was inspired by Derek Yerger's code, though I don't
-think much of that remains.  In any event that was..
-    (copyleft) 2006 by Derek Yerger - Free to distribute freely.
-
-The CRC code was excerpted and inspired by the Dallas Semiconductor
-sample code bearing this copyright.
-//---------------------------------------------------------------------------
-// Copyright (C) 2000 Dallas Semiconductor Corporation, All Rights Reserved.
-//
-// Permission is hereby granted, free of charge, to any person obtaining a
-// copy of this software and associated documentation files (the "Software"),
-// to deal in the Software without restriction, including without limitation
-// the rights to use, copy, modify, merge, publish, distribute, sublicense,
-// and/or sell copies of the Software, and to permit persons to whom the
-// Software is furnished to do so, subject to the following conditions:
-//
-// The above copyright notice and this permission notice shall be included
-// in all copies or substantial portions of the Software.
-//
-// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-// MERCHANTABILITY,  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-// IN NO EVENT SHALL DALLAS SEMICONDUCTOR BE LIABLE FOR ANY CLAIM, DAMAGES
-// OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-// ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-// OTHER DEALINGS IN THE SOFTWARE.
-//
-// Except as contained in this notice, the name of Dallas Semiconductor
-// shall not be used except as stated in the Dallas Semiconductor
-// Branding Policy.
-//--------------------------------------------------------------------------
-*/
-
-#include "OWSlave.h"
-#include "pins_arduino.h"
-
-extern "C" {
-// #include "WConstants.h"
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
-}
-
-#define DIRECT_READ(base, mask)        (((*(base)) & (mask)) ? 1 : 0)
-#define DIRECT_MODE_INPUT(base, mask)  ((*(base+1)) &= ~(mask))
-#define DIRECT_MODE_OUTPUT(base, mask) ((*(base+1)) |= (mask))
-#define DIRECT_WRITE_LOW(base, mask)   ((*(base+2)) &= ~(mask))
-#define DIRECT_WRITE_HIGH(base, mask)  ((*(base+2)) |= (mask))
-
-#define TIMESLOT_WAIT_RETRY_COUNT microsecondsToClockCycles(120) / 10L
-
-OWSlave::OWSlave(uint8_t pin) {
-    pin_bitmask = digitalPinToBitMask(pin);
-    baseReg = portInputRegister(digitalPinToPort(pin));
-}
-
-void OWSlave::setRom(unsigned char rom[8]) {
-    for (int i=0; i<7; i++)
-        this->rom[i] = rom[i];
-    this->rom[7] = crc8(this->rom, 7);
-}
-
-void OWSlave::setRomnc(unsigned char rom[8]) {
-   for (int i=0; i<8; i++)
-        this->rom[i] = rom[i];
-}
-
-bool OWSlave::waitForRequest(bool ignore_errors) {
-    errno = ONEWIRE_NO_ERROR;
-    for (;;) {
-        if (!waitReset(0) )
-            continue;
-        if (!presence() )
-            continue;
-        if (recvAndProcessCmd() )
-            return TRUE;
-        else if ((errno == ONEWIRE_NO_ERROR) || ignore_errors)
-            continue;
-        else
-            return FALSE;
-    }
-}
-
-bool OWSlave::recvAndProcessCmd() {
-    char addr[8];
-
-    for (;;) {
-      switch (recv() ) {
-        case 0xF0: // SEARCH ROM
-            search();
-            return FALSE;
-        case 0x33: // READ ROM
-            sendData(rom, 8);
-            if (errno != ONEWIRE_NO_ERROR)
-                return FALSE;
-            break;
-        case 0x55: // MATCH ROM
-            recvData(addr, 8);
-            if (errno != ONEWIRE_NO_ERROR)
-                return FALSE;
-            for (int i=0; i<8; i++)
-                if (rom[i] != addr[i])
-                    return FALSE;
-            return TRUE;
-        case 0xCC: // SKIP ROM
-            return TRUE;
-        default: // Unknown command
-            if (errno == ONEWIRE_NO_ERROR)
-                return FALSE;
-            else
-                return FALSE;
-      }
-    }
-}
-
-bool OWSlave::search() {
-    uint8_t bitmask;
-    uint8_t bit_send, bit_recv;
-
-    for (int i=0; i<8; i++) {
-        for (bitmask = 0x01; bitmask; bitmask <<= 1) {
-            bit_send = (bitmask & rom[i])?1:0;
-            sendBit(bit_send);
-            sendBit(!bit_send);
-            bit_recv = recvBit();
-            if (errno != ONEWIRE_NO_ERROR)
-                return FALSE;
-            if (bit_recv != bit_send)
-                return FALSE;
-        }
-    }
-    return TRUE;
-}
-
-bool OWSlave::waitReset(uint16_t timeout_ms) {
-    uint8_t mask = pin_bitmask;
-    volatile uint8_t *reg asm("r30") = baseReg;
-    unsigned long time_stamp;
-
-    errno = ONEWIRE_NO_ERROR;
-    cli();
-    DIRECT_MODE_INPUT(reg, mask);
-    sei();
-    if (timeout_ms != 0) {
-        time_stamp = micros() + timeout_ms*1000;
-        while (DIRECT_READ(reg, mask)) {
-            if (micros() > time_stamp) {
-                errno = ONEWIRE_WAIT_RESET_TIMEOUT;
-                return FALSE;
-            }
-        }
-    } else
-        while (DIRECT_READ(reg, mask)) {};
-    time_stamp = micros() + 540;
-    while (DIRECT_READ(reg, mask) == 0) {
-        if (micros() > time_stamp) {
-            errno = ONEWIRE_VERY_LONG_RESET;
-            return FALSE;
-        }
-    }
-    if ((time_stamp - micros()) > 70) {
-        errno = ONEWIRE_VERY_SHORT_RESET;
-        return FALSE;
-    }
-    delayMicroseconds(30);
-    return TRUE;
-}
-bool OWSlave::waitReset() {
-    return waitReset(1000);
-}
-
-bool OWSlave::presence(uint8_t delta) {
-    uint8_t mask = pin_bitmask;
-    volatile uint8_t *reg asm("r30") = baseReg;
-
-    errno = ONEWIRE_NO_ERROR;
-    cli();
-    DIRECT_WRITE_LOW(reg, mask);
-    DIRECT_MODE_OUTPUT(reg, mask);    // drive output low
-    sei();
-    delayMicroseconds(120);
-    cli();
-    DIRECT_MODE_INPUT(reg, mask);     // allow it to float
-    sei();
-    delayMicroseconds(300 - delta);
-    if ( !DIRECT_READ(reg, mask)) {
-        errno = ONEWIRE_PRESENCE_LOW_ON_LINE;
-        return FALSE;
-    } else
-        return TRUE;
-}
-bool OWSlave::presence() {
-    return presence(25);
-}
-
-uint8_t OWSlave::sendData(char buf[], uint8_t len) {
-    uint8_t bytes_sended = 0;
-
-    for (int i=0; i<len; i++) {
-        send(buf[i]);
-        if (errno != ONEWIRE_NO_ERROR)
-            break;
-        bytes_sended++;
-    }
-    return bytes_sended;
-}
-
-uint8_t OWSlave::recvData(char buf[], uint8_t len) {
-    uint8_t bytes_received = 0;
-    
-    for (int i=0; i<len; i++) {
-        buf[i] = recv();
-        if (errno != ONEWIRE_NO_ERROR)
-            break;
-        bytes_received++;
-    }
-    return bytes_received;
-}
-
-void OWSlave::send(uint8_t v) {
-    errno = ONEWIRE_NO_ERROR;
-    for (uint8_t bitmask = 0x01; bitmask && (errno == ONEWIRE_NO_ERROR); bitmask <<= 1)
-        sendBit((bitmask & v)?1:0);
-}
-
-uint8_t OWSlave::recv() {
-    uint8_t r = 0;
-
-    errno = ONEWIRE_NO_ERROR;
-    for (uint8_t bitmask = 0x01; bitmask && (errno == ONEWIRE_NO_ERROR); bitmask <<= 1)
-        if (recvBit())
-            r |= bitmask;
-    return r;
-}
-
-void OWSlave::sendBit(uint8_t v) {
-    uint8_t mask = pin_bitmask;
-    volatile uint8_t *reg asm("r30") = baseReg;
-
-    cli();
-    DIRECT_MODE_INPUT(reg, mask);
-    if (!waitTimeSlot() ) {
-        errno = ONEWIRE_WRITE_TIMESLOT_TIMEOUT;
-        sei();
-        return;
-    }
-    if (v & 1)
-        delayMicroseconds(50);
-    else {
-        cli();
-        DIRECT_WRITE_LOW(reg, mask);
-        DIRECT_MODE_OUTPUT(reg, mask);
-        delayMicroseconds(50);
-        DIRECT_WRITE_HIGH(reg, mask);
-        sei();
-    }
-    sei();
-    return;
-}
-
-uint8_t OWSlave::recvBit(void) {
-    uint8_t mask = pin_bitmask;
-    volatile uint8_t *reg asm("r30") = baseReg;
-    uint8_t r;
-
-    cli();
-    DIRECT_MODE_INPUT(reg, mask);
-    if (!waitTimeSlot() ) {
-        errno = ONEWIRE_READ_TIMESLOT_TIMEOUT;
-        sei();
-        return 0;
-    }
-    delayMicroseconds(30);
-    r = DIRECT_READ(reg, mask);
-    sei();
-    return r;
-}
-
-bool OWSlave::waitTimeSlot() {
-    uint8_t mask = pin_bitmask;
-    volatile uint8_t *reg asm("r30") = baseReg;
-    uint16_t retries;
-
-    retries = TIMESLOT_WAIT_RETRY_COUNT;
-    while ( !DIRECT_READ(reg, mask))
-        if (--retries == 0)
-            return FALSE;
-    retries = TIMESLOT_WAIT_RETRY_COUNT;
-    while ( DIRECT_READ(reg, mask))
-        if (--retries == 0)
-            return FALSE;
-    return TRUE;
-}
-
-#if OWSlave_CRC
-// The 1-Wire CRC scheme is described in Maxim Application Note 27:
-// "Understanding and Using Cyclic Redundancy Checks with Maxim iButton Products"
-//
-
-#if OWSlave_CRC8_TABLE
-// This table comes from Dallas sample code where it is freely reusable,
-// though Copyright (C) 2000 Dallas Semiconductor Corporation
-static const uint8_t PROGMEM dscrc_table[] = {
-      0, 94,188,226, 97, 63,221,131,194,156,126, 32,163,253, 31, 65,
-    157,195, 33,127,252,162, 64, 30, 95,  1,227,189, 62, 96,130,220,
-     35,125,159,193, 66, 28,254,160,225,191, 93,  3,128,222, 60, 98,
-    190,224,  2, 92,223,129, 99, 61,124, 34,192,158, 29, 67,161,255,
-     70, 24,250,164, 39,121,155,197,132,218, 56,102,229,187, 89,  7,
-    219,133,103, 57,186,228,  6, 88, 25, 71,165,251,120, 38,196,154,
-    101, 59,217,135,  4, 90,184,230,167,249, 27, 69,198,152,122, 36,
-    248,166, 68, 26,153,199, 37,123, 58,100,134,216, 91,  5,231,185,
-    140,210, 48,110,237,179, 81, 15, 78, 16,242,172, 47,113,147,205,
-     17, 79,173,243,112, 46,204,146,211,141,111, 49,178,236, 14, 80,
-    175,241, 19, 77,206,144,114, 44,109, 51,209,143, 12, 82,176,238,
-     50,108,142,208, 83, 13,239,177,240,174, 76, 18,145,207, 45,115,
-    202,148,118, 40,171,245, 23, 73,  8, 86,180,234,105, 55,213,139,
-     87,  9,235,181, 54,104,138,212,149,203, 41,119,244,170, 72, 22,
-    233,183, 85, 11,136,214, 52,106, 43,117,151,201, 74, 20,246,168,
-    116, 42,200,150, 21, 75,169,247,182,232, 10, 84,215,137,107, 53};
-
-//
-// Compute a Dallas Semiconductor 8 bit CRC. These show up in the ROM
-// and the registers.  (note: this might better be done without to
-// table, it would probably be smaller and certainly fast enough
-// compared to all those delayMicrosecond() calls.  But I got
-// confused, so I use this table from the examples.)
-//
-uint8_t OWSlave::crc8(char addr[], uint8_t len)
-{
-    uint8_t crc = 0;
-
-    while (len--) {
-        crc = pgm_read_byte(dscrc_table + (crc ^ *addr++));
-    }
-    return crc;
-}
-#else
-//
-// Compute a Dallas Semiconductor 8 bit CRC directly.
-//
-uint8_t OWSlave::crc8(char addr[], uint8_t len)
-{
-    uint8_t crc = 0;
-    
-    while (len--) {
-        uint8_t inbyte = *addr++;
-        for (uint8_t i = 8; i; i--) {
-            uint8_t mix = (crc ^ inbyte) & 0x01;
-            crc >>= 1;
-            if (mix) crc ^= 0x8C;
-            inbyte >>= 1;
-        }
-    }
-    return crc;
-}
-#endif
-
-#endif
diff --git a/OWSlave.h b/OWSlave.h
deleted file mode 100644
index f054858..0000000
--- a/OWSlave.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef iButton_h
-#define iButton_h
-
-#if defined(ARDUINO) && ARDUINO >= 100
-  #include "Arduino.h"
-#else
-  #include "WProgram.h"
-#endif 
-
-#include <inttypes.h>
-
-// You can exclude CRC checks altogether by defining this to 0
-#ifndef OWSlave_CRC
-#define OWSlave_CRC 1
-#endif
-
-// Select the table-lookup method of computing the 8-bit CRC
-// by setting this to 1.  The lookup table no longer consumes
-// limited RAM, but enlarges total code size by about 250 bytes
-#ifndef OWSlave_CRC8_TABLE
-#define OWSlave_CRC8_TABLE 0
-#endif
-
-#define FALSE 0
-#define TRUE  1
-
-#define ONEWIRE_NO_ERROR 0
-#define ONEWIRE_READ_TIMESLOT_TIMEOUT 1
-#define ONEWIRE_WRITE_TIMESLOT_TIMEOUT 2
-#define ONEWIRE_WAIT_RESET_TIMEOUT 3
-#define ONEWIRE_VERY_LONG_RESET 4
-#define ONEWIRE_VERY_SHORT_RESET 5
-#define ONEWIRE_PRESENCE_LOW_ON_LINE 6
-
-class OWSlave {
-  private:
-    bool waitTimeSlot();
-    uint8_t pin_bitmask;
-    volatile uint8_t *baseReg;
-    char rom[8];
-  public:
-    bool recvAndProcessCmd();
-    OWSlave(uint8_t pin);
-    void setRom(unsigned char rom[8]);
-    void setRomnc(unsigned char rom[8]);
-    bool waitForRequest(bool ignore_errors);
-    bool waitReset(uint16_t timeout_ms);
-    bool waitReset();
-    bool presence(uint8_t delta);
-    bool presence();
-    bool search();
-    uint8_t sendData(char buf[], uint8_t data_len);
-    uint8_t recvData(char buf[], uint8_t data_len);
-    void send(uint8_t v);
-    uint8_t recv(void);
-    void sendBit(uint8_t v);
-    uint8_t recvBit(void);
-#if OWSlave_CRC
-    static uint8_t crc8(char addr[], uint8_t len);
-#endif
-    uint8_t errno;
-};
-
-#endif
diff --git a/OneWireIO.ino b/OneWireIO.ino
index 5f04bc0..fa2253e 100644
--- a/OneWireIO.ino
+++ b/OneWireIO.ino
@@ -1,15 +1,21 @@
-#include "OWSlave.h"
+#include "Arduino.h"
+#include "SerialChannel.h"
 
 #define LEDPin    13
 #define OWPin     2
 #define InterruptNumber 0 // Must correspond to the OWPin to correctly detect state changes. On Arduino Uno, interrupt 0 is for digital pin 2
 
-unsigned char rom[8] = {0xE2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00};
+const int SkipSamples = 8; // how many samples we want to skip between two samples we keep (can be used to lower the sampling frequency)
+const int BufferSize = 128;
+byte buffer1[BufferSize];
+byte buffer2[BufferSize];
+byte* backBuffer = buffer1;
+byte backBufferPos = 0;
+byte samplesSkipped = SkipSamples;
+unsigned long backBufferStartTime = micros();
 
-volatile long prevInt    = 0;      // Previous Interrupt micros
-volatile boolean owReset = false;
-
-OWSlave oneWire(OWPin); 
+SerialChannel oscilloscope;
+SerialChannel debug;
 
 void setup()
 {
@@ -20,43 +26,69 @@ void setup()
 
     attachInterrupt(InterruptNumber,onewireInterrupt,CHANGE);
     
-    oneWire.setRom(rom);
+    cli();//disable interrupts
+  
+    //set up continuous sampling of analog pin 0
+    //clear ADCSRA and ADCSRB registers
+    ADCSRA = 0;
+    ADCSRB = 0;
+    
+    ADMUX |= (1 << REFS0); //set reference voltage
+    ADMUX |= (1 << ADLAR); //left align the ADC value- so we can read highest 8 bits from ADCH register only
+    
+    ADCSRA |= (1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0); //set ADC clock with 128 prescaler- 16mHz/128=125kHz ; 13 cycles for a conversion which means 9600 samples per second
+    ADCSRA |= (1 << ADATE); //enabble auto trigger
+    ADCSRA |= (1 << ADIE); //enable interrupts when measurement complete
+    ADCSRA |= (1 << ADEN); //enable ADC
+    ADCSRA |= (1 << ADSC); //start ADC measurements
+    
+    sei();//enable interrupts
+    
+    Serial.begin(9600);
+    oscilloscope.init("oscilloscope");
+    debug.init("debug");
 }
 
 void loop()
 {
-    if (owReset) owHandler();
+    cli();//disable interrupts
+    byte* currentBuffer = backBuffer;
+    unsigned long currentBufferStartTime = backBufferStartTime;
+    byte currentBufferSize = backBufferPos;
+    backBuffer = (backBuffer == buffer1 ? buffer2 : buffer1);
+    backBufferPos = 0;
+    backBufferStartTime = micros();
+    sei();//enable interrupts
+    
+    unsigned long now = micros();
+    debug.write((byte*)&now, 4);
+    debug.write("Starting buffer transmission");
+    
+    oscilloscope.write((byte*)&currentBufferStartTime, 4);
+    oscilloscope.write(currentBuffer, currentBufferSize);
+    
+    now = micros();
+    debug.write((byte*)&now, 4);
+    debug.write("Buffer transmitted");
 }
 
-void owHandler(void)
-{
-    detachInterrupt(InterruptNumber);
-    owReset=false;
-    
-    if (oneWire.presence()) {
-        if (oneWire.recvAndProcessCmd()) {
-            uint8_t cmd = oneWire.recv();
-            if (cmd == 0x44) {
-                digitalWrite(LEDPin, HIGH);
-            }
-            if (cmd == 0xBE) {
-                for( int i = 0; i < 9; i++) {
-                    oneWire.send((byte)0);
-                }
-            }
-        }
+ISR(ADC_vect) {//when new ADC value ready
+    byte sample = ADCH; //store 8 bit value from analog pin 0
+        
+    if(samplesSkipped++ < SkipSamples)
+        return;
+    samplesSkipped = 0;
+
+    backBuffer[backBufferPos++] = sample;
+    if(backBufferPos >= BufferSize)
+    {
+        // overflow of back buffer, we loose the current sample
+        backBufferPos = BufferSize - 1;
     }
-    attachInterrupt(InterruptNumber,onewireInterrupt,CHANGE);
 }
 
 void onewireInterrupt(void)
 {
-    volatile long lastMicros = micros() - prevInt;
-    prevInt = micros();
-    if (lastMicros >= 410 && lastMicros <= 550)
-    {
-        //  OneWire Reset Detected
-        owReset=true;
-    }
+    //digitalWrite(LEDPin, digitalRead(OWPin));
 }
-
+
diff --git a/SerialChannel.cpp b/SerialChannel.cpp
new file mode 100644
index 0000000..64b57f5
--- /dev/null
+++ b/SerialChannel.cpp
@@ -0,0 +1,29 @@
+#include "Arduino.h"
+#include "SerialChannel.h"
+
+short SerialChannel::nextId = 0;
+
+SerialChannel::SerialChannel()
+{
+}
+
+void SerialChannel::init(const char* name)
+{
+    id = nextId++;
+    Serial.write((short)0);
+    Serial.write(id);
+    Serial.write(strlen(name));
+    Serial.write(name);
+}
+
+void SerialChannel::write(byte* data, short byteCount)
+{
+    Serial.write(byteCount);
+    Serial.write(id);
+    Serial.write(data, byteCount);
+}
+
+void SerialChannel::write(const char* text)
+{
+    Serial.write((byte*)text, strlen(text));
+}
diff --git a/SerialChannel.h b/SerialChannel.h
new file mode 100644
index 0000000..3c66d7d
--- /dev/null
+++ b/SerialChannel.h
@@ -0,0 +1,21 @@
+#ifndef _SerialChannel_h_
+#define _SerialChannel_h_
+
+class SerialChannel
+{
+private:
+    static short nextId;
+    short id;
+
+public:
+    SerialChannel();
+    
+    void init(const char* name);
+    
+    void write(byte* data, short byteCount);
+    
+    void write(const char* text);
+};
+
+#endif
+
diff --git a/SerialMonitor/SerialMonitor.sln b/SerialMonitor/SerialMonitor.sln
new file mode 100644
index 0000000..f11d68b
--- /dev/null
+++ b/SerialMonitor/SerialMonitor.sln
@@ -0,0 +1,22 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 2013
+VisualStudioVersion = 12.0.31101.0
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "SerialMonitor", "SerialMonitor\SerialMonitor.csproj", "{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal
diff --git a/SerialMonitor/SerialMonitor/App.config b/SerialMonitor/SerialMonitor/App.config
new file mode 100644
index 0000000..8e15646
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/App.config
@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
+    </startup>
+</configuration>
\ No newline at end of file
diff --git a/SerialMonitor/SerialMonitor/App.xaml b/SerialMonitor/SerialMonitor/App.xaml
new file mode 100644
index 0000000..cc3b030
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/App.xaml
@@ -0,0 +1,8 @@
+<Application x:Class="SerialMonitor.App"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             StartupUri="MainWindow.xaml">
+    <Application.Resources>
+         
+    </Application.Resources>
+</Application>
diff --git a/SerialMonitor/SerialMonitor/App.xaml.cs b/SerialMonitor/SerialMonitor/App.xaml.cs
new file mode 100644
index 0000000..0ea20d1
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/App.xaml.cs
@@ -0,0 +1,17 @@
+using System;
+using System.Collections.Generic;
+using System.Configuration;
+using System.Data;
+using System.Linq;
+using System.Threading.Tasks;
+using System.Windows;
+
+namespace SerialMonitor
+{
+    /// <summary>
+    /// Interaction logic for App.xaml
+    /// </summary>
+    public partial class App : Application
+    {
+    }
+}
diff --git a/SerialMonitor/SerialMonitor/MainWindow.xaml b/SerialMonitor/SerialMonitor/MainWindow.xaml
new file mode 100644
index 0000000..51b1a8f
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/MainWindow.xaml
@@ -0,0 +1,8 @@
+<Window x:Class="SerialMonitor.MainWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        Title="MainWindow" Height="350" Width="525">
+    <Grid>
+        
+    </Grid>
+</Window>
diff --git a/SerialMonitor/SerialMonitor/MainWindow.xaml.cs b/SerialMonitor/SerialMonitor/MainWindow.xaml.cs
new file mode 100644
index 0000000..11f2c90
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/MainWindow.xaml.cs
@@ -0,0 +1,28 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows;
+using System.Windows.Controls;
+using System.Windows.Data;
+using System.Windows.Documents;
+using System.Windows.Input;
+using System.Windows.Media;
+using System.Windows.Media.Imaging;
+using System.Windows.Navigation;
+using System.Windows.Shapes;
+
+namespace SerialMonitor
+{
+    /// <summary>
+    /// Interaction logic for MainWindow.xaml
+    /// </summary>
+    public partial class MainWindow : Window
+    {
+        public MainWindow()
+        {
+            InitializeComponent();
+        }
+    }
+}
diff --git a/SerialMonitor/SerialMonitor/Properties/AssemblyInfo.cs b/SerialMonitor/SerialMonitor/Properties/AssemblyInfo.cs
new file mode 100644
index 0000000..e61c9f3
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/Properties/AssemblyInfo.cs
@@ -0,0 +1,55 @@
+using System.Reflection;
+using System.Resources;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+using System.Windows;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("SerialMonitor")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Microsoft")]
+[assembly: AssemblyProduct("SerialMonitor")]
+[assembly: AssemblyCopyright("Copyright © Microsoft 2015")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+//In order to begin building localizable applications, set 
+//<UICulture>CultureYouAreCodingWith</UICulture> in your .csproj file
+//inside a <PropertyGroup>.  For example, if you are using US english
+//in your source files, set the <UICulture> to en-US.  Then uncomment
+//the NeutralResourceLanguage attribute below.  Update the "en-US" in
+//the line below to match the UICulture setting in the project file.
+
+//[assembly: NeutralResourcesLanguage("en-US", UltimateResourceFallbackLocation.Satellite)]
+
+
+[assembly: ThemeInfo(
+    ResourceDictionaryLocation.None, //where theme specific resource dictionaries are located
+    //(used if a resource is not found in the page, 
+    // or application resource dictionaries)
+    ResourceDictionaryLocation.SourceAssembly //where the generic resource dictionary is located
+    //(used if a resource is not found in the page, 
+    // app, or any theme specific resource dictionaries)
+)]
+
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers 
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/SerialMonitor/SerialMonitor/Properties/Resources.Designer.cs b/SerialMonitor/SerialMonitor/Properties/Resources.Designer.cs
new file mode 100644
index 0000000..b6091de
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/Properties/Resources.Designer.cs
@@ -0,0 +1,71 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.0
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace SerialMonitor.Properties
+{
+
+
+    /// <summary>
+    ///   A strongly-typed resource class, for looking up localized strings, etc.
+    /// </summary>
+    // This class was auto-generated by the StronglyTypedResourceBuilder
+    // class via a tool like ResGen or Visual Studio.
+    // To add or remove a member, edit your .ResX file then rerun ResGen
+    // with the /str option, or rebuild your VS project.
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources
+    {
+
+        private static global::System.Resources.ResourceManager resourceMan;
+
+        private static global::System.Globalization.CultureInfo resourceCulture;
+
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources()
+        {
+        }
+
+        /// <summary>
+        ///   Returns the cached ResourceManager instance used by this class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager
+        {
+            get
+            {
+                if ((resourceMan == null))
+                {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("SerialMonitor.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+
+        /// <summary>
+        ///   Overrides the current thread's CurrentUICulture property for all
+        ///   resource lookups using this strongly typed resource class.
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture
+        {
+            get
+            {
+                return resourceCulture;
+            }
+            set
+            {
+                resourceCulture = value;
+            }
+        }
+    }
+}
diff --git a/SerialMonitor/SerialMonitor/Properties/Resources.resx b/SerialMonitor/SerialMonitor/Properties/Resources.resx
new file mode 100644
index 0000000..af7dbeb
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/Properties/Resources.resx
@@ -0,0 +1,117 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file
diff --git a/SerialMonitor/SerialMonitor/Properties/Settings.Designer.cs b/SerialMonitor/SerialMonitor/Properties/Settings.Designer.cs
new file mode 100644
index 0000000..098d3a4
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/Properties/Settings.Designer.cs
@@ -0,0 +1,30 @@
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.0
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace SerialMonitor.Properties
+{
+
+
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "11.0.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase
+    {
+
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+
+        public static Settings Default
+        {
+            get
+            {
+                return defaultInstance;
+            }
+        }
+    }
+}
diff --git a/SerialMonitor/SerialMonitor/Properties/Settings.settings b/SerialMonitor/SerialMonitor/Properties/Settings.settings
new file mode 100644
index 0000000..033d7a5
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/Properties/Settings.settings
@@ -0,0 +1,7 @@
+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="uri:settings" CurrentProfile="(Default)">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>
\ No newline at end of file
diff --git a/SerialMonitor/SerialMonitor/SerialMonitor.csproj b/SerialMonitor/SerialMonitor/SerialMonitor.csproj
new file mode 100644
index 0000000..6cb916e
--- /dev/null
+++ b/SerialMonitor/SerialMonitor/SerialMonitor.csproj
@@ -0,0 +1,104 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{97704F53-6CA1-4155-9E8F-AEBFEEC20A8B}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>SerialMonitor</RootNamespace>
+    <AssemblyName>SerialMonitor</AssemblyName>
+    <TargetFrameworkVersion>v4.5</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <ProjectTypeGuids>{60dc8134-eba5-43b8-bcc9-bb4bc16c2548};{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}</ProjectTypeGuids>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Xaml">
+      <RequiredTargetFramework>4.0</RequiredTargetFramework>
+    </Reference>
+    <Reference Include="WindowsBase" />
+    <Reference Include="PresentationCore" />
+    <Reference Include="PresentationFramework" />
+  </ItemGroup>
+  <ItemGroup>
+    <ApplicationDefinition Include="App.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </ApplicationDefinition>
+    <Page Include="MainWindow.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
+    <Compile Include="App.xaml.cs">
+      <DependentUpon>App.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="MainWindow.xaml.cs">
+      <DependentUpon>MainWindow.xaml</DependentUpon>
+      <SubType>Code</SubType>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Properties\AssemblyInfo.cs">
+      <SubType>Code</SubType>
+    </Compile>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+    </EmbeddedResource>
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <AppDesigner Include="Properties\" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>
\ No newline at end of file